$45
Press to Purchase
 (includes US/Canada shipping)
 


Building your Zenith CH750
Finishing
A step by step video guide for builders of the popular Zenith CH750 aircraft kit.

 .Return to Build Videos

 
This DVD is a double disk volume in a series of videos being developed to cover the entire build process for the CH750 kit. Finishing is the final segment of building demonstrations.  This 2 DVD set shows the final assembly of the airframe including: mounting the horizontal tail, wings, and rigging the cables and controls of the aircraft.  In addition, installation and routing of fuel lines and other plumbing details is shown.  Except for engine and avionics, this video concludes the building process for the airframe.  It is assumed the builder has completed the steps shown in the prior 750 building video series ( Fuselage 1 and 2, Horizontal Tail, Wings, Slats & Flaps ) The pictures on this page were captured from the actual video footage in order to show the scope of construction provided in this video volume.

Note: This production is not associated or endorsed by Zenith Aircraft. It does not replace or supersede the documentation provided with the kit.  It is meant to be an aid in building the aircraft and its methods are presented only as a suggestion to builders.

This affordable 2 disk DVD video is approximately 2.5 hours in length and is divided into various video chapters to make navigation and review of desired sections fast and easy  The $45 price includes handling and first class postage. (International orders welcome)

 

$45.00  Includes First class shipping

You can use your credit card by pressing the ADD to CART button below (uses secure encrypted connection)

 OR you can send a check for $45 to:

HomebuiltHELP
Box 111
Brussels, WI 54204

We ship same day we receive your check!
OR
If you want to pay by credit card but not online, then email us at support@HomebuiltHelp.com with your phone number and best time to call and we can complete the transaction on the phone

 



Rudder cable attachments


Rudder hinge assembly


Strut fitting placement on fuselage


Fitting bolted to strut


Strut length sizing and attachment

 


Installing jury struts


Gascolator under seat


Creating routes for fuel/brake lines

 


Mounting and aligning the stabilizer


Measuring range of elevator travel


Trimming elevator horn for proper travel


Rigging elevator cables



Assembling control horn


Strut fitting inventory


Drilling struts for fitting



Lifting wing into place


Rigging wing dihedral


Bubble door installation


Windshield installation


Routing of plumbing under seat


Panel and top skin assembly